3.5Ni for low temperature toughness

Home > Filler materials > 3.5Ni for low temperature toughness

3.5Ni for low temperature toughness

INEFIL 80 Ni 3

Low alloy copper-coated solid wire designed for welding low alloy steels with 3,5% Ni content, fine grained for low temperature applications. It is used in petrochemical industry where it finds applications in construction of cryogenic plant and associated pipework, in the manufacture, storage and distribution of volatile liquids and liquefied gases, when operating at temperatures to -80°C. To be used under the shield of Ar+O2.

AWS A 5.28: ER80S-Ni3
EN ISO 14341-B: G 57P 7 M22 SN71
K 300 M (Wire basket Precision Layer Wound) 15 Kg
The K300 wire basket is to be used together with our adapter COD. PFCS 0400050
D 300 PLW (Plastic Spool Precision Layer Wound) 15 Kg
D 200 PLW (Plastic spool Precision Layer Wound) 5 Kg
K 300 RANDOM (K300 Wire Basket RANDOM) 17 Kg

The K300 wire basket is to be used together with our adapter COD. PFCS 0400050

Octapac 250 (Ecological Pay-Off Pack 250 Kg) 250 Kg

Octapak is the new ecological pay-off pack from INE spa, and has been developed to meet the increasing demands of environmental regulations. The system is designed around an all fiber drum without the need for a plastic cone. The liner from the wire feeder can be connected directly to the top of the drum, which means reduced set up costs for the end user. When the drum is empty, it simply folds fiat for quick and easy disposal. Add to this the fact that there are no metal parts to remove, and you have a very efficient, cost effective bulk pack system. OCTAPAK offers the following features and benefits: - costs for the disposal of packaging are greatly reduced because there are no metal parts to separate before discarding; - when the drum is finished, it folds completely flat in a few seconds, quickly and easily; - set up costs are also minimized as there is no need for a costly plastic cone. The cone has been replaced with a reinforced cardboard lid; - the usual plastic tension ring has been replaced with a disposable type; - where access is a problem for overhead cranes or forklift trucks, you can use the optional "Octapak trolley" and position the drum exactly where needed; - when Octapak is used in conjunction with a robot, two optional plates can be fitted to the lid to give extra reinforcement where the liner connects.

Plastic Spool Random Wound 17 Kg
Pay-Off Pack 250 Kg 250 Kg
Pay-Off Pack 350 Kg 350 Kg
ASTM
A 203 Gr D, E, F
A 333 Gr 3
A 350 Gr LF3
A 352 Gr LC3
EN
(BS 1501 Gr 503)
(BS 1503 Gr 503)
(BS 1504 Gr 503 LT60)
C 0.10
Mn 1.00
Si 0.60
Ni 3.50
S 0.010
P 0.010
Cu 0.12
0.8 mm
1.0 mm
1.2 mm
1.6 mm
Yield strength 550 (T) MPa
Tensile strength 630 (T) MPa
Elongation 25 (T) %
Impact test Kv (-50°C) 60 (T) J
Impact test Kv (-60°C) 50 (T) J
Impact test Kv (-75°C) 35 (T) J
All positions
INETIG 80 Ni 3 3.5Ni for low temperature toughness
INESUB S2Ni3 3.5Ni for low temperature toughness
-

Download detailed specs