SKYLINE ALU 4500 MIG

SKYLINE ALU 4500 MIG
SKYLINE ALU 4500 MIG
SKYLINE ALU 4500 is a multifunction synergic inverter-based generator, with separate wire feed, for use in MIG/MAG continuous wire welding, short spray, pulsed and double-pulsed arc (on steel, stainless steel, and aluminum), AC TIG welding of aluminum and its alloys. They also allow DC TIG welding of steel and MMA welding of acid, rutile, and basic electrodes. The arc striking in TIG welding is triggered by HF or LIFT ARC.
Welding process
  • MIG/MAG
  • MIG/MAG - Synergic
  • MIG/MAG - Synergic pulsed and double pulsed
  • TIG AC/DC HF
  • TIG AC/DC LIFT
  • TIG DC HF
  • TIG DC LIFT
  • MMA
Technology:
  • Inverter
  • Three-phase
Manufacturing standard
CONTATTACI
DOWNLOAD DOCUMENTS

The inverter technology and the special design features allow for reduced weight and size without losing reliability and performance. The welding process, regulated by the microprocessor, ensures steady welding (with an exceptional dynamic even at low amperage), is splash-free, and provides perfect arc striking. Synergic control allows for the automatic selection of the welding parameters, even in the harshest working conditions, guaranteeing precision and repeatability.
The intuitive control panel allows you to adjust the settings by touchscreen or using the knobs. The display shows 3 selectable levels of complexity according to the operator’s level of experience. Save up to 99 programs as Jobs.
The interface can be locked with password-protected access to functions.

In MIG/MAG welding the included process are INE Root and INE Soft. Special programs are optional.

Numerous functions are available for TIG welding, including:
• The ascent ramp and the descent ramp (from 0 to 10 s), the pre-gas and the post-gas (0 to 25 seconds or synergic).
• Option to set the initial and final current time.
• Option to set base current, current 2, initial and final current can be set as an absolute value or as a percentage of the main current.
• PULSED TIG option, with adjustable frequency from 0.1 to 5000 Hz, basic and peak current and duty cycle over the entire frequency range.
• AC TIG without wave deformation up to maximum current.
• AC welding with square, triangular, sine and rounded square wave (silent mode).
• TIG MIX function, alternating DC and AC welding periods.Automatic torch tungsten rounding. Timed welding (micro welding).
• ‘TACK’ function: allows fast and reliable spot-welding of thin sheets with high penetration.

MMA Welding: Hot Star, Arc Force and VRD functions.

Main voltage 3x400V~ 50-60Hz
Delayed line fuse 20A - 400V~
Current regulation 5÷450A
Max. absorbed power 20.1 kW
MMA current range 450A 40%
400A 60%
350A 100%
TIG current range 70V
Current range 1.6 ÷ 6.0
MMA duty factor 1.0 ÷ 5.0
TIG duty factor IP23S
Number of switch step 50 Kg/ 103 Kg (configurazione completa)
No-load voltage 302x645x525 mm
554x1015x1436* mm (configurazione completa)
Ø MMA electrodes
Ø TIG electrodes
Protection class
Weight
Dimension (WxDxH)
 I have read the privacy policy. (Read policy)

DOWNLOAD DOCUMENTS