Rutile flux cored wire with addition of Ni, Cr and Cu

Rutile flux cored wire with addition of Ni, Cr and Cu for welding of weathering steels such as CORTEN A/B/C, ITACOR, RESCO with yield strength up to 500 MPa. Excellent CVN impact toughness down to -40°C. AWS A5.29: E81T1-W2M

Clasificaciones

EN ISO 17632-A: T 50 3 Z P M21 2 H5
AWS A5.29: E81T1-W2M

Certificaciones

Marca CE
ukca

SOLICITE COTIZACIÓN

DESCARGUE DOCUMENTOS

Rutile flux cored wire alloyed with Ni-Cr-Cu designed for the welding of weather-resistant steels (CorTen type) with yield strength up to 500 MPa. For welding in all position in single pass and multi pass. Excellent impact toughness down to -40°C in the as-welded conditions. Low hydrogen content (< 5ml/100g) ensures low risk of cold cracking. Easy slag removal and very good bead appearance with overall good operator appeal. This wire must be used in all those applications where the weld needs to match the corrosion resistance of the base material. To be used under Ar + CO2 gas shielding.

C	0.05
Mn	1.15
Si	0.55
S	0.005
P	0.010
Ni	0.60
Cu	0.55
Cr	0.60

Gas de protección	M21
Resistencia a la conformación	570 MPa
Resistencia a la tracción	650 MPa
Alargamiento	20 %
Resistencia Kv (-20°C)	100 J
Resistencia Kv (-30°C)	90 J
Resistencia Kv (-40°C)	80 J

Diámetro (mm)	Voltios	Amperios
1,0	15-28	90-240
1,2	16-34	110-340
1,6	19-36	140-440

todas excepto vertical hacia abajo

INETUB R81T1-Cu