SKYLINE HFP 4000

Inverter power source for DC TIG and MMA welding

SKYLINE HFP 4000
SKYLINE HFP 4000
SKYLINE HFP 4000
SKYLINE HFP 4000
SKYLINE HFP 4000
DC pulsed inverter power source for TIG welding (H.F. and Lift-arc) of alloy steel and iron-carbon alloys. It is used in MMA welding with acid, mild steel and low-hydrogen electrodes. It is used in maintenance, medium-to-heavy structural steel works and building industry.
Welding process
  • TIG DC
  • TIG HF
  • TIG LIFT
  • MMA
Technology:
  • Inverter
  • Three-phase
Manufacturing standard
  • EN 60974
DOWNLOAD DOCUMENTS

The new inverter generators in the SKYLINE HFP series are expressly designed for DC TIG welding of steel. The arc striking is triggered by HF or LIFT ARC. They are also suitable for MMA welding of acid, rutile and basic electrodes. Inverter technology and the particular care taken in its construction allow reduction of the weight, bulk and energy absorption without penalizing reliability, while optimizing performance. Microprocessors maintain control of the welding process at all times, guaranteeing optimum stability, exceptional dynamics (even at minimum amperages) and perfect priming of the arc. The control panel is simple and intuitive. The touchscreen technology integrated into the large colour display allows you to set the welding parameters with a few simple touches; settings can also be adjusted with the the two knobs located on the side. 3 levels of complexity may be configured, selectable according to the operator's level of experience. Starting from the "basic" mode, with simplified regulation, we move on to the "intermediate" stage and the "advanced" stage, which allows the most experienced welders to fine-tune parameters down to the smallest detail. Up to 99 programs can be quickly and easily stored as Jobs. For added safety, the interface can be locked with password-protected access to functions. Numerous functions are available for TIG welding, including: the ascent ramp (from 0 to 10 seconds), the descent ramp (from 0 to 10 seconds), pre-gas (from 0 to 25 seconds) and post-gas (from 0 to 25 seconds) synergetic post-gas the possibility of setting the initial and final current time the possibility of setting the base current, current 2, initial and final current as both an absolute value and a percentage with respect to the main current the TIG PULSED option, with pulse frequency adjustable from 0.1 to 5000 Hz, with basic and peak current regulation and duty cycle throughout the frequency range. This setting permits welding on extremely thin thicknesses, because the limited thermal input reduces deformation of the welded metal timed welding with optimum time management (spot welding) the 'TACK' function: allows you to combine the two flaps with high penetration, speed and precision. In MMA welding, the Hot Start is adjustable for easy priming of coated electrodes and the ARC Force to prevent bonding during welding. There is also a VRD function, required for use in high-risk environments. The generators can be combined with the CW9 cooling unit and/or a PR8, PR9 generator trolley or mounted on a KR1 wheel kit. Remote control is possible using the CD1 manual, CD2 pedal or up-down torch controls. The generators are also equipped with a series of devices and sensors that guarantee maximum efficiency and safety of use. The SKYLINE HFP range is produced in full compliance with European standards, guaranteeing a technologically advanced and safe product in all its components.

Main voltage 3x400 V
50-60 HZ
Delayed line fuse 16 A - 400 V
Max. absorbed power 17.0 kW
Power Factor 0.93
CURRENT REGULATION RANGE 5÷400 A
Current regulation lineare
Duty Factor 40% 400A
60% 330A
100% 280A
No-load voltage 55 V
Ø MMA electrodes 1.6 ÷ 6.0
Ø TIG electrodes 1.0 ÷ 5.0
Protection class IP23S
Weight 29.3 kg
63.5 kg complete configuration
Dimension (WxDxH) 250x550x432 mm
554x996x908 mm complete configuration
 I have read the privacy policy. (Read policy)

DOWNLOAD DOCUMENTS

VARIANTS

Main voltage

Delayed line fuse

Max. absorbed power

CURRENT REGULATION RANGE

Duty Factor

No-load voltage

SKYLINE HFP 4000

3x400 V
50-60 HZ

16 A - 400 V

17.0 kW

5÷400 A

40% 400A
60% 330A
100% 280A

55 V

SKYLINE HFP 3000

3x400 V
50-60 HZ

12 A - 400 V

11.0 kW

5÷300 A

40% 300A
60% 250A
100% 200A

55 V

SKYLINE HFP 5000

3x400 V
50-60 HZ

32 A - 400 V

23.0 kW

5÷500 A

45% 500A
60% 420A
100% 380A

70 V

 I have read the privacy policy.(Read policy)