Inverter power sources for plasma cutting

Inverter power source for use in the plasma cutting of metals. It is equipped with a pilot arc restart device which allows the continuous cutting of punched plates and grids. It is designed for use especially in medium-to-heavy steel structural works
  • Inverter
  • Three-phase
Manufacturing standard
  • EN 60974

SKYLINE 120 is an innovative current generator for the plasma cutting of metals, designed for even the most discerning professional, while being extremely simple to use for the less experienced operator to guarantee results that are always perfect. It is designed for use in medium-to-heavy structural steel works. These power sources have been designed and implemented on the base of the most updated and innovative technologies conceived for inverters and microprocessors in power electronics and signal processing. Thus a system has been achieved that, in addition to the traditional dependability of INE products, is featuring high dynamics of the necessary control for obtaining very good quality cutting. The generator gives excellent quality cuts without burring on the reverse for both fine and medium thick sheets in soft steel, stainless steel, aluminium and aluminium alloys. Cutting parameters are set by means of the fully digital control board, which assures process quality and reproducibility. The pilot arc is initiated by starting LIFT (without the use of high frequency); this allows excellent outward absence of electromagnetic interference. An automatic restart device allows the continuous cutting of punched plates and grids. The protection systems on the generator make it extremely safe to use and protect its integrity in case of overheating and overloads. Furthermore, with the innovative intake power control function it is ideal for using with any any sort of power of mains exploiting all its available energy. PR9 power source trolley is available for greater ease of use and movement.

Main voltage 3x400 V
50-60 HZ
Delayed line fuse 25 A - 400 V
Max. absorbed power 17.9 kW
Power Factor 0.94
Duty Factor 40% 120A
60% 110A
100% 90A
No-load voltage 314 V
Max thickness on mild steel 40 mm
55 mm severance
Max thickness on stainless steel 30 mm
40 mm severance
Protection class IP23S
Weight 41 kg
Dimension (WxDxH) 302x675x525 mm
 I have read the privacy policy. (Read policy)



Main voltage

Delayed line fuse

Max. absorbed power


Duty Factor

No-load voltage

Max thickness on mild steel

Max thickness on stainless steel


3x400 V
50-60 HZ

25 A - 400 V

17.9 kW

25÷120 A

40% 120A
60% 110A
100% 90A

314 V

40 mm
55 mm severance

30 mm
40 mm severance

 I have read the privacy policy.(Read policy)