SKYLINE KME 3003

Inverter power sources for MIG/MAG and MMA

Synergic DC inverter power source, with separated wire feeding unit, for MIG/MAG welding of steel, ironcarbon alloys and aluminium and MMA welding with acid, mild steel and low-hydrogen electrodes. It is used in maintenance and medium-to-light structural steel works.
Welding process
  • MIG/MAG
  • MIG/MAG pulsed synergic
  • MMA
Technology:
  • Inverter
  • Three-phase
Manufacturing standard
  • EN 60974
DOWNLOAD DOCUMENTS

SKYLINE KME 3003 is the new multifunction synergic inverter-based generator with separate wire feed, for use in MIG/MAG continuous wire welding (on steel, stainless steel and aluminium and in welding with coated electrodes (MMA).

 

WHAT SETS IT APART

The inverter technology and the special design features have contributed to the reduction in weight and size, as well as in absorbed power, without penalizing their reliability and performance. The welding process, controlled by the microprocessor thousands of times per second, ensures stable and almost spatter-free welding, exceptional dynamics (even at low amperage), and perfect arc start.

Controls

The user-friendly and intuitive control board allows to quickly set the welding parameters and displays their exact instant measurement, thus ensuring process quality and reproducibility. MMA welding operation allows adjustment of both Hot Start, to facilitate arc start when welding with coated electrodes, and Arc Force, to prevent these from sticking when welding. The power sources are equipped with appropriate safety devices to ensure their performance. A temperature sensor and the mains voltage control (fluctuations between -10% and +10% of the nominal value) protect the internal components.

Configurations

Versions available are the air-cooling-on-trolley and the water-cooled version (with built-in torch cooling unit).

Main voltage 3x400 V
50-60 HZ
Delayed line fuse 16 A - 400 V
Max. absorbed power 11.0 kW
Power Factor 0.94
EFFICIENCY ? 90%
IDLE STATE 25W
CURRENT REGULATION RANGE 6÷300 A
Current regulation lineare
Duty Factor 40% 300A
60% 250A
100% 200A
No-load voltage 55 V
Ø MMA electrodes 1.6 - 2.5 - 3.2 - 4.0 - 5.0
Ø FILO MIG/MAG 0.6 - 0.8 - 1.0 -(1.2AL)
Protection class IP23S
Weight 29 kg
79 kg (complete confoguration)
Dimension (WxDxH) 250x550x432 mm
554x1011x1038 mm (complete configuration)
EQUIVALENT MODELS no equivalent models
 I have read the privacy policy. (Read policy)

DOWNLOAD DOCUMENTS

VARIANTS

Main voltage

Delayed line fuse

Max. absorbed power

CURRENT REGULATION RANGE

Duty Factor

No-load voltage

SKYLINE KME 3003

3x400 V
50-60 HZ

16 A - 400 V

11.0 kW

6÷300 A

40% 300A
60% 250A
100% 200A

55 V

SKYLINE KME 4000

3x400 V
50-60 HZ

16 A - 400 V

16.2 kW

6÷400 A

40% 400A
60% 330A
100% 280A

62 V

SKYLINE KME 5000

3x400 V
50-60 HZ

32 A - 400 V

21.5 kW

6÷500 A

40% 500A
60% 410A
100% 350A

70 V

 I have read the privacy policy.(Read policy)