CME is the range of multifunction synergic inverter-based generators, with integrated wire feed, for use in MIG/MAG continuous wire welding, short spray and pulsed arc* (on steel, stainless steel and aluminum) and in welding with coated electrodes (MMA).
The inverter technology and special design features allow for reduced weight and size without losing reliability and performance. The welding process, regulated by the microprocessor, ensures steady welding (with an exceptional dynamic even at low amperage), is splash-free and provides perfect arc striking. Synergic control allows for automatic selection of the welding parameters, even in the harshest working conditions, guaranteeing precision and repeatability
These generators have been designed for high performance, offering significant advantages in terms of eﬃciency and reliability. The eﬃciency of the processes saves production time; controlled ventilation and cooling allow for further reduction in energy costs.
Digital control board
The easy-to-use and intuitive control panel allows for quick set-up and accurate measurement of the welding parameters via the display, ensuring quality and repetitiveness of the process. In addition, 99 welding programs can be saved ensuring speed and that adhere to the saved settings.
In MIG/MAG, various welding sequences are possible (2-touch, 4-touch, 3 levels and 2-touch + 3 levels) as well as various settings such as SOFTSTART, BURNBACK, WAVE CONTROL (to reduce spatter) and other settings relating directly to the welding sequence.
In MMA welding, the Hot Start is adjustable for an easy striking of coated electrodes and the ARC Force to prevent sticking during welding
The generators’ protection systems ensure maximum user safety. A temperature sensor and voltage check (variable between -10% to +10% in relation to the nominal value) protect the internal components.
The CME range is produced in full compliance with European standards, guaranteeing a technologically advanced and safe product in all its components
Type of welding process where arc lenght can be adjusted, obtaining an immediate response to varying conditions. Simultaneously meets the requirements of various welding needs:
Benefits of Pulsrun compared to standard pulse
Welding process required when quick response to stick-out variations is needed or in the case of very long stick-outs.
|Main voltage||3x400 V
|Delayed line fuse||12 A - 400 V
|Max. absorbed power||10.7 kW
|CURRENT REGULATION RANGE||6÷300 A
|Duty Factor||300A 40%
|No-load voltage||55 V
|Ø MMA electrodes||1.6÷5.0
|Ø FILO MIG/MAG||0.8 - 1.0 - (1.2 AL)
76 kg (complete configuration)
|Dimension (WxDxH)||302x645x525 mm
554x1015x910 mm (complete configuration)
|EQUIVALENT MODELS||no equivalent models