MGT 200

Inverter power sources for MIG/MAG TIG and MMA

DC synergic inverter power source for MIG/MAG welding of steel, iron-carbon alloys and aluminium, MMA welding with acid, mild steel and low-hydrogen electrodes and TIG welding ( H.F. and Lift-arc) of alloy steel and iron-carbon alloys. It is used in maintenance and light structural steel works.
Welding process
  • MIG/MAG - Synergic
  • TIG HF
  • TIG LIFT
  • MMA
Technology:
  • Inverter
  • Single-phase
Manufacturing standard
  • EN 60974
DOWNLOAD DOCUMENTS

Power source, with built-in wire feeder, for MIG/MAG welding (of steel, stainless steel and aluminium) and MMA welding. A simple system on the front panel facilitates polarity inversion, thus allowing the gasless welding of cored wires (GASLESS FCW).

The inverter technology and the special design features have contributed to the reduction in weight and size, as well as in absorbed power, without penalizing their reliability and performance.
The welding process, controlled by the microprocessor thousands of times per second, ensures stable and almost spatter-free welding, exceptional dynamics (even at low amperage), and perfect arc start.
 

The user-friendly and intuitive control board allows to quickly set the welding parameters and displays their exact instant measurement, thus ensuring process quality and reproducibility.

MIG/MAG welding operation allows adjustment of soft-start (to improve arc start), burn-back (for a craterless finish) and inductance (to reduce spattering).
MMA welding operation allows adjustment of both Hot Start, to facilitate arc start when welding with coated electrodes, and Arc Force, to prevent these from sticking when welding.

The power sources are equipped with appropriate safety devices to ensure their performance. A temperature sensor and the mains voltage control (fluctuations between -20% and +15% of the nominal value) protect the internal components. Versions available are the air-cooling-on-trolley and the water-cooled version (with built-in torch cooling unit).

Main voltage 1x230 V
50-60 HZ
Delayed line fuse 16 A - 230 V
Max. absorbed power 5.9 kW
EFFICIENCY ? 84%
CURRENT REGULATION RANGE 6÷200 A
Current regulation lineare
Duty Factor 40% 200A
60% 180A
100% 140A
No-load voltage 62 V
IDLE STATE 15W
Ø MMA electrodes 1.6 - 2.5 - 3.2 - 4.0
Ø FILI MIG/MAG 0.6 - 0.8 - (1.0)
Protection class IP22S
Weight 22 kg
Weight 34 kg complete configuration
Dimension (WxDxH) 200x460x390 mm
EQUIVALENT MODELS no equivalent models
 I have read the privacy policy. (Read policy)

DOWNLOAD DOCUMENTS

 I have read the privacy policy.(Read policy)