SKYLINE KMP 3200

Inverter power sources for MIG/MAG, MMA and DC TIG

Synergic DC, pulsed/double-pulsed inverter power source for MIG/MAG welding of steel, iron-carbon alloys and aluminium, MMA welding with acid, mild steel and low-hydrogen electrodes and TIG welding (H.F. and Lift-arc) of alloy steel and ironcarbon alloys. It is used in maintenance and medium-to-light structural steel works.
Welding process
  • MIG/MAG
  • MIG/MAG - Synergic pulsed and double pulsed
  • TIG DC HF
  • TIG DC LIFT
  • MMA
Technology:
  • Inverter
  • Three-phase
Manufacturing standard
  • EN 60974
DOWNLOAD DOCUMENTS

KMP 3200 is the new multifunction synergic inverter-based generator with separate wire feed, for use in MIG/MAG continuous wire welding, short/spray, pulsed and double pulsed arc (on steel, stainless steel and aluminium), in TIG welding with HF or LIFT ARC striking and in welding with coated electrodes (MMA).

WHAT SETS IT APART

The inverter technology and the special design features have contributed to the reduction in weight and size, as well as in absorbed power, without penalizing their reliability and performance. The welding process, regulated by the microprocessor one thousand times a second, allows steady welding, with an exceptional dynamic even with low amp values, free from splashing and with perfect striking of the arc. The synergic control allows the automatic selection of the optimum welding parameters, even in the harshest working conditions, guaranteeing precision and repeatability.

Controls

The fully digital control board, equipped with a wide OLED display, facilitates the selection of the type of welding process. In MIG/MAG welding, thanks to the SYNERGY function, the setting of the parameters is carried out simply by selecting the type of wire, the diameter and the gas used. In order to suit the different users’ needs, all parameters can be set and modified manually, as well. TIG welding operation allows adjustment of slope-up, slope-down, pre-gas and post-gas between 0 and 10 seconds. The PULSED TIG option, offering adjustable pulse frequency between 1 and 250 Hz, as well as adjustable base and peak current, allows welding on very thin plates as the limited heat produced reduces the risk of deformation of the welded metal. MMA welding operation allows adjustment of both Hot Start, to facilitate arc start when welding with coated electrodes, and Arc Force, to prevent these from sticking when welding. The power sources are equipped with appropriate safety devices to ensure their performance. A temperature sensor and the mains voltage control (fluctuations between -10% and +10% of the nominal value) protect the internal components.

Configurations

Remote control CD1 and CD4 (hand-operated) and remote control CD2 (foot-operated) are available for ease of use.

Main voltage 3x400 V
50-60 HZ
Delayed line fuse 16 A - 400 V
Max. absorbed power 11.9 kW
Power Factor 0.94
CURRENT REGULATION RANGE 6÷320 A
Current regulation lineare
Duty Factor 45% 320A
60% 280A
100% 240A
No-load voltage 62 V
Ø MMA electrodes 1.6 ÷ 5.0
Ø TIG electrodes 1.0 -1.6 - 2.4 - 3.2
Ø FILO MIG/MAG 0.6 - 0.8 - 1.0 - (1.2AL)
Protection class IP23S
Weight 42 kg
95 kg complete configuration
Dimension (WxDxH) 302x645x525 mm
554x1015x1436 mm complete configuration
 I have read the privacy policy. (Read policy)

DOWNLOAD DOCUMENTS

VARIANTS

Main voltage

Delayed line fuse

Max. absorbed power

CURRENT REGULATION RANGE

Duty Factor

No-load voltage

SKYLINE KMP 3200

3x400 V
50-60 HZ

16 A - 400 V

11.9 kW

6÷320 A

45% 320A
60% 280A
100% 240A

62 V

SKYLINE KMP 5000

3x400 V
50-60 HZ

32 A - 400 V

23.4 kW

6÷500 A

40% 500A
60% 410A
100% 350A

70 V

 I have read the privacy policy.(Read policy)