THT 501

Electronic power sources for MIG/MAG and MMA welding

DC power source, with separated wire feeding unit, for MIG/MAG welding. Welding current and voltage are electronically adjusted by means of the potentiometers. It can be used in MMA welding with acid, low-hydrogen and cellulose electrodes. Use: medium-toheavy structural steel works.
Welding process
  • MIG/MAG
  • MMA
Technology:
  • Traditional
  • Three-phase
Manufacturing standard
  • EN 60974
DOWNLOAD DOCUMENTS

The THT 401-501-751 are three-phase professional electronic generators, with separate electronically controlled rod trolley, for use in seam welding (MIG/MAG) and electrode welding (MMA) for acid, basic, stainless steel, aluminium and cellulose.

WHAT SETS IT APART

The three-phase power transformer with base current and the SCR arc rectifier are totally controlled, and guarantee continuous controls of the welding parameters and excellent welding even at lower output levels. The THT501 and THT751 versions can also be used for scarfing (ARC-AIR). These are very strong, reliable and easy to use welders. They are ideal for use in medium and heavy metal work, depending on the model, and are particularly suitable for use in shipyards. All the magnetic coils are made from top quality copper and forced ventilation cooled. This gives excellent performance with a 60% work cycle. A temperature probe protects the internal components. The voltage change terminal block inside the machine permits changing the supply voltage.

Configurations

The rod trolley with 4 reels TT4 and 4 reels TP4 (for site work with 5 kg reels) give smooth and constant rod flow, thanks to the control board and the 100W motor installed. On request they may be fitted with digital volt/ammeter. On request, a CW5 gun-cooling unit may be installed. The connection extensions between the machine and rod trolley are available in standard lengths of 4, 10, 25 m. air or water, and 50 m for just air. Special measurements are available on request. The CD-THT remote control permits using the machine as generator for electrode welding (MMA), without the need for the extension or trolley.

Main voltage 3x230/400 V
50-60 HZ
Delayed line fuse 80 A - 230 V
50 A - 400 V
Max. absorbed power 27.1 kVA
EFFICIENCY ɳ 82%
IDLE STATE 480W
Current range 50÷500 A
CURRENT REGULATION LINEARE
Duty Factor 60% 500A
100% 400A
MIG/MAG No-load voltage 14÷41 V
MMA No-load voltage 79 V
Ø MIG/MAG wire 0.8 - 1.0 - 1.2 - 1.6
Ø MMA electrodes 2.5÷6.0
Protection class IP21S
Weight 206 kg
Dimension (WxDxH) 530x1060x730 mm
EQUIVALENT MODELS no equivalent models
 I have read the privacy policy. (Read policy)

DOWNLOAD DOCUMENTS

VARIANTS

Main voltage

Delayed line fuse

Max. absorbed power

Current range

Duty Factor

MIG/MAG No-load voltage

MMA No-load voltage

THT 501

3x230/400 V
50-60 HZ

80 A - 230 V
50 A - 400 V

27.1 kVA

50÷500 A

60% 500A
100% 400A

14÷41 V

79 V

THT 401

3x230/400 V
50-60 HZ

63 A - 230 V
32 A - 400 V

19.9 kVA

40÷400 A

14÷37 V

78 V

THT 751

3x230/400 V
50-60 HZ

125 A - 230 V
80 A - 400 V

44.7 kVA

75÷750 A

 I have read the privacy policy.(Read policy)